FG Sub Box 1st

I'm making this box for my Bronco.  I made it following the specification for a good SPL (3.2 cuft).  There will be other projects like the amp rack and a center console. 

Let me know your opinions.

After taking out the seats and carpet. A good mess left.

As you can see no router were used,  I used a jigsaw (real pain ine the ass)

The fleece part.

Several layers of FG (will be 6).

The upper port

After sanding and verifing the sub.

The skull for the lower port

I made the mold of the back and checked if fit.

I will update the work as soon I advance.  Now comes the bondo and the sanding.

I'll be placing pix as soon I advance on the project.

I'll be working this weekend with the bondo.

Does anyone knows a site were I can look for images of custom installation, specially amp racks?

I'm thinking what design use in mine, but am block.

thanks y'all

Here is a place with a lot of custom installs:

http://www.carstereo.com/installs/?Car-Audio-Installs-Gallery-Installer

Lookin good so far. cant wait to see it finished.

Thanks a lot customcarchris,

I'll take a look :)

Here are the promised pictures. I just need to sand the box a little more to then paint it color red (as interiors)

I began with the amp rack.          Enjoy and post comments and suggestions!! Thanks.

I find some hole so decided to continue sand 'till I be able to see myself in the box (mirror) :)

Here you can watch that I missed by 1 1/2" the desired angle (I fixed adding little pieces, ha, ha)