the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Remote Start, '03 Escalade EXT


Post ReplyPost New Topic
< Prev Topic Next Topic >
Ren92 
Copper - Posts: 56
Copper spacespace
Joined: September 26, 2004
Location: United States
Posted: June 28, 2005 at 4:42 PM / IP Logged  
I am using the GMDL-BP and it starts and runs for about 10-15 sec. and then shuts off and does it again.Anyone have any ideals.
mo12v 
Platinum - Nominee - Posts: 2,748
Platinum - Nominee spaceThis member consistently provides reliable informationspace
Joined: September 30, 2003
Location: Afghanistan
Posted: June 28, 2005 at 9:07 PM / IP Logged  
Be sure you have the GMDL-BP programmed and that the GMDL-BP is powered up during and after cranking
MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
OhioMike1101 
Silver - Posts: 343
Silver spacespace
Joined: August 22, 2004
Location: United States
Posted: June 28, 2005 at 10:27 PM / IP Logged  

double check that you have both IGN and ACC wires powered.  Also make sure the GMBP is programmed correctly.

IBPLXR is a much better bypass.....  I hate the GMBP after using the PLXR.

Ren92 
Copper - Posts: 56
Copper spacespace
Joined: September 26, 2004
Location: United States
Posted: June 28, 2005 at 11:04 PM / IP Logged  
I powered up the second ign.(big white) but I only power up the orange acc. Is there another acc. wire I need to power up?
KarTuneMan 
Platinum - Posts: 7,056
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: December 14, 2004
Location: Isle Of Man
Posted: June 29, 2005 at 12:55 AM / IP Logged  
brown......
Ren92 
Copper - Posts: 56
Copper spacespace
Joined: September 26, 2004
Location: United States
Posted: June 29, 2005 at 9:05 AM / IP Logged  
Are you saying power the brown as an acc.?
Ren92 
Copper - Posts: 56
Copper spacespace
Joined: September 26, 2004
Location: United States
Posted: June 29, 2005 at 10:24 PM / IP Logged  

Ok I have both ign. and acc. wires hooked up and the truck  still wont stay running.It runs for about 8-10sec. I figured I would try a 555l also with no change so I am think it's not the passlock system.What else could it be?I need to get this truck out of our bay but don't want it to leave with out it working. I am new to the Viper alarms so is there something I might not have hooked up that would turn the relay pack off?


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer