Audiovox ground when running wire?

Home / the12volt's Install Bay / Car Security and Convenience / Audiovox ground when running wire? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

xerox

Member - Posts: 2

Joined: June 27, 2005

Posted: June 29, 2005 at 9:09 AM / IP Logged

Hooking up a bypass kit to an audiovox aps-996a alarm/remote start and the gm-u.7 wants a "ground when running" - input on its blue wire. I have looked high and low for the source of this on my alarm and cannot find it...any suggestions?

Back to Top

Powermyster

Silver - Posts: 962

Joined: April 06, 2005

Location: Ireland

Posted: June 29, 2005 at 9:55 AM / IP Logged

some alarm aux's can be programmed to come on when disarming.

dunno bout when running but see if the aux's are programmable like this

Back to Top

metaverse

Copper - Posts: 210

Joined: June 13, 2002

Location: United States

Posted: June 29, 2005 at 9:03 PM / IP Logged

On the 996a there should be a Light blue Ignition 3 output.

It should provide a "300ma ground output 3 seconds before remote start, ground while running, and 4 seconds after the remote start turns off/shut down"

Use this wire. Should work fine with no programming required..

Back to Top

xerox

Member - Posts: 2

Joined: June 27, 2005

Posted: June 29, 2005 at 10:45 PM / IP Logged

perfect, thanks guys!

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Audiovox ground when running wire?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.