the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2000 Mits. Mont. Sprt. 4dr


Post ReplyPost New Topic
< Prev Topic Next Topic >
gadamon 
Member - Posts: 1
Member spacespace
Joined: June 29, 2005
Location: United States
Posted: June 29, 2005 at 1:19 PM / IP Logged  

I have just installed a new 44-PW530 pwr antenna in my Mits.  When I removed the old antenna, it had a 2 wire connector on it. When installed the new ant. it had 2 wires, one red (with fuse) constant +12v, and one blue switched leg. I put my 12v test light on the 2 wire in harness plug and found one wire "hot" when radio first powered on, then goes dead, and the other wire is hot when radio shut off, then goes dead after delay.  I can only assume old power antenna needed 1 hot to raise ant, and 1 hot to lower ant.

I tried finding a constant hot from the switched side of the radio in the harness, but cannot find any other than the speaker wires.

Can anyone give me some ideas on how I can resolve this issue, without having to go to a solid mast antenna?

Thanks,
GAD3
Chad7n7 
Silver - Posts: 408
Silver spacespace
Joined: March 09, 2004
Location: United States
Posted: July 01, 2005 at 8:59 PM / IP Logged  
This ought to help you out.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, January 17, 2022 • Copyright © 1999-2022 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer