Cannot get the factory alarm to shutoff.

Home / the12volt's Install Bay / Car Security and Convenience / Cannot get the factory alarm to shutoff. (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

AZ-ss

Member - Posts: 31

This member has made a donation to the12volt.com. Click here for more info.

Joined: January 22, 2004

Location: United States

Posted: June 29, 2005 at 5:21 PM / IP Logged

This is on a 2005 gmc fullsize pickup.

I installed a prestige APS-996 and used the 456g and 555l.

The remote start works as it should, the truck starts with the key just fine. But regardless how the truck is started, the display on the cluster always shows the lock on the car symbol. (my guess is the factory alarm is still engaged.)

I tried grounding a lead that was connected from the "light green wire in the driver door lock module" and the display still comes on.

Again, the truck starts fine, but the display still shows the lock on the car symbol.

Any ideas?

THANKS!

Back to Top

auex

Platinum - Posts: 5,041

Joined: December 23, 2002

Location: Arizona, United States

Posted: June 29, 2005 at 5:28 PM / IP Logged

First thing, reconnect the rcode wire and see if the light persists. The light is more then likely a fault in the passlock system. If the light goes away then it sounds like there is something wrong with the 555L. What you should do is triple check all the connections, especially the ground. If that doesn't fix it then try resetting the system. Open the window, reach in the window and crank but don't start the car, leave the car sit for 20-30 minutes, come back and reach in and start the car. The light should go off if it is a problem with the passlock system.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Cannot get the factory alarm to shutoff.

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.