1996 rover 600 OEM system.

Home / the12volt's Install Bay / Car Security and Convenience / 1996 rover 600 OEM system. (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

Powermyster

Silver - Posts: 962

Joined: April 06, 2005

Location: Ireland

Posted: June 29, 2005 at 5:20 PM / IP Logged

my mate was messing with his car disconnected the alarm brain. (Valeo alarm) any way he connected it back and presto alarm LED stays on central locking isn't working and alarm is immobilised.

disconnected battery and nothing. still the same. usually when armed the led flashes he said its on solid though.

this car is honda accord derived. is accord oem alarm Valeo.

any suggestions i can't figure it out

dare_ds69

Silver - Posts: 419

Joined: January 25, 2005

Location: New Jersey, United States

Posted: June 29, 2005 at 5:32 PM / IP Logged

try close all doors, locked whit the key wait like 5 minutes and unlocke twise with the key.

how own your mind, control your life.

MECP certified. always use a DMM

Powermyster

Silver - Posts: 962

Joined: April 06, 2005

Location: Ireland

Posted: June 29, 2005 at 5:41 PM / IP Logged

do you mean unlock lock unlock

or just do the unlock motion twice

Powermyster

Silver - Posts: 962

Joined: April 06, 2005

Location: Ireland

Posted: June 29, 2005 at 6:11 PM / IP Logged

didn't work both ways

any other idea's

Powermyster

Silver - Posts: 962

Joined: April 06, 2005

Location: Ireland

Posted: June 30, 2005 at 5:00 AM / IP Logged

abyone know if its the same as the accord alarm

joe_1

Silver - Posts: 286

Joined: November 12, 2004

Location: United Kingdom

Posted: June 30, 2005 at 3:27 PM / IP Logged

try holding in the lock button on the remote first for about 20 sec if that doesnt work try doing it with the ignition on if that dont work, suspect connections on alarm harness

minihif44

Member - Posts: 6

Joined: June 28, 2005

Location: United Kingdom

Posted: July 01, 2005 at 12:47 PM / IP Logged

u could try this,this works on uk rover 600

remove the batteries and press one of the buttons for 10 seconds then reinstall batteries unlock car with key then press the lock button 4 times on the fourth press it should re sync and lock the doors

hope it helps

shaun

Powermyster

Silver - Posts: 962

Joined: April 06, 2005

Location: Ireland

Posted: July 02, 2005 at 4:54 AM / IP Logged

yeah he hasn't got any remote though apparently rover have a code. he is trying to get

just say the code is 3421

you like lock 3 times unlock 4 lock 2 unlock 1 with key in drivers door

something like that anyway will post if he gets the code

joe_1

Silver - Posts: 286

Joined: November 12, 2004

Location: United Kingdom

Posted: July 02, 2005 at 5:43 AM / IP Logged

yeah i know how to do that, the rover systems are so easy to bypass so if i was him i would just disable it

Powermyster

Silver - Posts: 962

Joined: April 06, 2005

Location: Ireland

Posted: July 02, 2005 at 6:39 AM / IP Logged

just ground the one wire to bypass al together isn't it

i gave him a diagram. dunno why he disconnected the alarm ecu in the first place

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.