the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

fibreglass bandpass


Post ReplyPost New Topic
< Prev Topic Next Topic >
jaybong 
Member - Posts: 17
Member spacespace
Joined: July 02, 2005
Location: Canada
Posted: July 05, 2005 at 11:01 AM / IP Logged  

i have a 4 door- no hatch and theres just not enough airspace in a false floor or wheelwell  to hold 4 dvc drivers.

I have seen ppl poke holes thru drivers that they couldnt steal.

so a bolted down box that hides the drivers is ideal

I hear what your saying about moving but truth is theives are everywhere. I live in a very nice area, where kids will travel to just because of the nice cars my neighbors own...

point of this project is that unless they take the whole car I wont lose my subs

Thanks for input guys- anyone wanna post up some pics of their setup>?

j68rh 
Copper - Posts: 147
Copper spacespace
Joined: March 31, 2005
Location: United States
Posted: July 05, 2005 at 3:30 PM / IP Logged  

here is what I was talking about this picture is of a 12 in a scion tc

fibreglass bandpass - Page 2 -- posted image.

if you look at my forum post its 2nd fiberglass project that could give you some more Ideas.  I am getting ready to do some more boxes.  And I attached the box from the inside of the box so that thing is not going anywhere unless they take the car.  But A little story when I had my silverado My box was the center consoule and It took me to take the seats out to get everything in and I fastened it with off size bolts to the old bitch seat frame and to the floor and when all send and down if someone whats your stuff they will take that is just part of doing this.  They took out every thing and nicely cut my wires and unbolted the bolts and the space they had to work with just surprised me because they left the seats in.  but they got everything my amps and subs, capacitors, headunit, and six dish changer.  oh well insurance covered everything and I got all new stuff.

j68rh 
Copper - Posts: 147
Copper spacespace
Joined: March 31, 2005
Location: United States
Posted: July 05, 2005 at 3:31 PM / IP Logged  

fibreglass bandpass - Page 2 -- posted image.

sorry about the pictures for some reason they always mess up when I post them

Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, December 7, 2022 • Copyright © 1999-2022 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer