amp installation

Home / the12volt's Install Bay / Car Audio / amp installation (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Jmeese

Copper - Posts: 114

Joined: June 03, 2005

Location: United States

Posted: July 05, 2005 at 11:35 AM / IP Logged

Ok just got my amp today and have a couple questions after reading the instruction manual. Amp is us acustics usx 2050 2 channel 50 watt rms. Will be adding this to Alpine component set. The amp has 3 settings, amp, hi pass, low pass. It also had adjustments for level, high pass and low pass. Since I will be running with a component set that has its own cross overs will I set the setting to amp and only adjust the level and not worry about the high pass and low pass settings?

Back to Top

Optik

Copper - Posts: 53

Joined: March 16, 2005

Location: United States

Posted: July 05, 2005 at 11:42 AM / IP Logged

Seems like a good idea to me. set the gain correctly and dont worry about the lpf and hpf

Back to Top

Jmeese

Copper - Posts: 114

Joined: June 03, 2005

Location: United States

Posted: July 05, 2005 at 11:44 AM / IP Logged

How do I determine what the proper gain level is?

Back to Top

nathan_454

Member - Posts: 16

Joined: July 05, 2005

Location: United States

Posted: July 05, 2005 at 11:50 AM / IP Logged

http://www.bcae1.com/

number 63 on the sidebar is how to set gains.

MY System, Pioneer Owns...Thanx Gabe

HU: DEH-P770MP

Fronts: TS-C160R

Rears :TS-A6995

Subs: 2x TS-W106C

Sub Amp: GM-7150M

4 CH: GM-6150F

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

amp installation

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.