clifford 3.5 horn honk problem

Home / the12volt's Install Bay / Car Security and Convenience / clifford 3.5 horn honk problem (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

NYDesi80

Member - Posts: 26

Joined: November 16, 2004

Location: United States

Posted: July 05, 2005 at 4:50 PM / IP Logged

Hey guys basically here's the problem, I have this alarm in a 03 ACURA TL TYPE S w/ navigation and the horn is hooked up to the alarm so that when the siren goes off when the alarm is triggered the horn honks too. Now the problem is when I unlock my doors, not only do I get 2 chirps from the siren but I also get one breif honk from the horn which I'd like to somehow disable. I know it can be done but my installer didn't want to do it, which I dont really want to get into. I know want to know whether I can do this myself or do I need to go somwhere to get it redone?

I am somewhat able to do these things on my own so if someone could be kind enough to explain how to do it, what I need to do it I'd be greatful. Thanx!!

Back to Top

joe_1

Silver - Posts: 286

Joined: November 12, 2004

Location: United Kingdom

Posted: July 05, 2005 at 5:00 PM / IP Logged

have you tried silent arm/disarm if you havent try it and see what happens

Back to Top

NYDesi80

Member - Posts: 26

Joined: November 16, 2004

Location: United States

Posted: July 05, 2005 at 5:09 PM / IP Logged

I've tried that, and it silences the chirps and honks however I dont want to have to do that everytime since that is very annoying and I don't always remember to do that everytime.

Back to Top

joe_1

Silver - Posts: 286

Joined: November 12, 2004

Location: United Kingdom

Posted: July 05, 2005 at 5:17 PM / IP Logged

do you have to have horn honk wired because i dont think there is a way around it you will just have to live with it

Back to Top

NYDesi80

Member - Posts: 26

Joined: November 16, 2004

Location: United States

Posted: July 05, 2005 at 6:37 PM / IP Logged

Well the horn doesn't honk on the close just the unlock. I asked around and said that some type of delay thing has to be wired becuase the second chirip of the siren causes the current to travel long enough so the horn gets triggered for a short second and honks. This is the reason why it doesnt happen on the close since the siren only chirps once.

Back to Top

NYDesi80

Member - Posts: 26

Joined: November 16, 2004

Location: United States

Posted: July 05, 2005 at 6:38 PM / IP Logged

Also one moer thing is that several TL's have been wired so that this isn't a problem, know it can be done, but need to know how and whether it is easy.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

clifford 3.5 horn honk problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.