881xp door locks

Home / the12volt's Install Bay / Car Security and Convenience / 881xp door locks (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

godshandkiller

Member - Posts: 15

Joined: June 29, 2005

Location: United States

Posted: July 06, 2005 at 11:08 PM / IP Logged

i have a 2000 mustang gt i'm going to install the 881xp do i need the 451m for the door locks and if so does anybody have a diagram how to wire it.thanks in advance

Search for other posts by godshandkiller

genehewett

Copper - Posts: 151

Joined: December 12, 2003

Location: Georgia, United States

Posted: July 10, 2005 at 7:17 PM / IP Logged

You do not need the 551m. The lock/unlock outputs from the system will do positive or negative pulse. Here is the wiring info.

Power Lock	lt. green	+	20 pin plug, pin 20 at GEM
Notes: The GEM (Generic Electronic Module) is located above the driver kick panel.
Power Unlock	purple	+	20 pin plug, pin 18 at GEM
Notes: The GEM (Generic Electronic Module) is located above the driver kick panel.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

881xp door locks

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.