Audio Control EQS question

Home / the12volt's Install Bay / Car Audio / Audio Control EQS question (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

crispycritter91

Member - Posts: 15

Joined: January 22, 2004

Location: United States

Posted: July 10, 2005 at 12:53 AM / IP Logged

I am trying to change the "PFM" or subsonic x-over frequency to a lower setting. I've tried googling for a retailer that has this chip to replace but no luck. I have also looked around the Audio Control site. Does any one know where to purchase this chip from or how to make one?

Search for other posts by crispycritter91

haemphyst

Platinum - Posts: 5,054

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: January 19, 2003

Location: Michigan, Bouvet Island

Posted: July 10, 2005 at 1:46 AM / IP Logged

Go to your local electronics store - NOT Radio Shack... ask for a 14 pin DIP header and (6) 1% resistors of the desired value. To figure the value, use this document... It's really easy to build them, or AudioControl has them for $10.00 in stock. Shipping should be a couple more dollars.

It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."

crispycritter91

Member - Posts: 15

Joined: January 22, 2004

Location: United States

Posted: July 11, 2005 at 6:25 AM / IP Logged

Man, thanks! Time to start working on this.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Audio Control EQS question

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.