is there anyway to install a shock sensor

Home / the12volt's Install Bay / Car Security and Convenience / is there anyway to install a shock sensor (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Luckydvl

Member - Posts: 6

Joined: June 20, 2005

Location: United States

Posted: July 17, 2005 at 1:12 PM / IP Logged

I have my alarm that came with my hyundai elantra. its the stock one is there any way to hook a shock sensor to it it doesnt have any signal imput can i just hook it to like the doom light or hood pin switch just wondering.

Back to Top

neilfrombestbuy

Member - Posts: 19

Joined: July 17, 2005

Location: United States

Posted: July 17, 2005 at 2:10 PM / IP Logged

unfortunaly no, but who wants to use a factory alarm in the first place, aftermarket alarms are sooooo much better ;P

Back to Top

Search for other posts by neilfrombestbuy

OhioMike1101

Silver - Posts: 343

Joined: August 22, 2004

Location: United States

Posted: July 17, 2005 at 11:25 PM / IP Logged

Couldn't you hook up a shock sensor and use the trigger to pulse the door trigger and make the factory alarm think the doors are open? Then maybe have a relay wired so that when the factory alarm is disabled (unlock) it would break the power connection to the shock.

Sounds like more trouble than it is worth, but I think it could be done with some creativity and a hand full of relays.

Back to Top

CutDog504

Silver - Posts: 637

Joined: May 14, 2002

Location: Louisiana, United States

Posted: July 18, 2005 at 2:22 AM / IP Logged

Not worth the trouble. For the labor and all other crap involved you may as well stab in an aftermarket alarm.

Back to Top

Powermyster

Silver - Posts: 962

Joined: April 06, 2005

Location: Ireland

Posted: July 18, 2005 at 3:25 AM / IP Logged

it can be done using the door trigger but i'd go with a new alarm.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

is there anyway to install a shock sensor

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.