Blazer Bose Headunit question

Home / the12volt's Install Bay / Car Audio / Blazer Bose Headunit question (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

nomad45

Member - Posts: 10

Joined: January 01, 2005

Location: Canada

Posted: July 18, 2005 at 5:57 PM / IP Logged

The later model GM products seem to all have the same headunits, some of which are bose.

My question is:

Do these Bose headunits just have line-level outputs (similar to a preout on an aftermarket deck) or are the fully amped speaker outputs?

If i wanted to add all aftermarket amps/speakers/sub etc to the bose headunit, could i not just interface the headunits speaker outputs straight into an amplifier?

Has anyone done anything like this?

redpeppers

Silver - Posts: 483

This member has made a donation to the12volt.com. Click here for more info.

Joined: May 24, 2005

Location: United States

Posted: July 18, 2005 at 11:50 PM / IP Logged

i would go to the output of the amp...not the signal out of deck....that could burn out the deck.

Where theres is a wire there's a way.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Blazer Bose Headunit question

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.