First Amp Rack Project, pics

Home / the12volt's Install Bay / Car Audio / First Amp Rack Project, pics (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

bert miller

Member - Posts: 3

Joined: July 21, 2005

Location: Bahamas

Posted: July 21, 2005 at 6:14 PM / IP Logged

i installed my car stereo but it wont power up. a constant 12v is connected, grounded and speakers connected. as well as the amplifier. now there is a red wire from the stereo that is not connected but the installation procedure said to connect that wire to an accessory in a fuse box. what is the accessory? a 12v switch?

Back to Top

bert miller

Member - Posts: 3

Joined: July 21, 2005

Location: Bahamas

Posted: July 21, 2005 at 6:17 PM / IP Logged

i installed my car stereo but it wont power up. a constant 12v is connected, grounded and speakers connected. as well as the amplifier. now there is a red wire from the stereo that is not connected but the installation procedure said to connect that wire to an accessory in a fuse box. what is the accessory? a 12v switch?

Back to Top

ss-installer

Silver - Posts: 444

Joined: February 27, 2005

Location: United States

Posted: July 21, 2005 at 9:24 PM / IP Logged

what kind of car is it? what kind of radio?

Back to Top

modena0

Copper - Posts: 85

Joined: July 18, 2004

Location: United States

Posted: July 22, 2005 at 10:03 AM / IP Logged

be careful.... today your doing an amp rack, tomorrow you will have every panel replaced in your car, and you'll buy a gravity feed HVLP Gun, get to be on a first name basis with your autobody supply shop salesman, and you'll start doing insane setups in your friends' cars because you'll run out of things to do to yours :-P

It is addicting though... i started with a simple system and some glassing in a friend's car... now im a glass fiend lol.. a simple Amp install, and now im installing computers in cars with housing and monitor bezel fabrication. Watch out IT COULD BE YOU NEXT!! lol

but that is a very nice amp rack.. keep it up

2000 Chevrolet S10

Premier DEH-P860MP

JL Audio XR650-CSi components

Boston 4x6 splits

JL Audio 10W3v2

Alpine MRP-M350

Clarion APA-4162

Back to Top

bert miller

Member - Posts: 3

Joined: July 21, 2005

Location: Bahamas

Posted: July 26, 2005 at 7:43 AM / IP Logged

thanx i figured it out what the accessory in the fuse box meant. ......it is the the ignition wire(yellow and red for my 1991 acrURA INTEGRA

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

First Amp Rack Project, pics

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.