momentary to constant

Home / the12volt's Install Bay / Relays / momentary to constant (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

gotohllcarolina

Member - Posts: 5

Joined: July 17, 2005

Location: United States

Posted: July 19, 2005 at 10:39 PM / IP Logged

would this allow me to turn on lights via my alarm.

if i hooked the +output to my lights and gave it a -pulse would the lights stay on for more than the time of the pulse?

thanks

Search for other posts by gotohllcarolina

genehewett

Copper - Posts: 151

Joined: December 12, 2003

Location: Georgia, United States

Posted: September 14, 2005 at 8:36 PM / IP Logged

Not sure about witch diagram on the page your asking about. None of them will work for what you are asking for. What lights are you wanting to activate and for how long? Where is the negative pulse coming from? (when you do what you want your lights to come on for a x amount of time). Check this out. This is what you need. You can get it at most car audio shops.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

momentary to constant

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.