the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Texas A&M writing class student


Post ReplyPost New Topic
< Prev Topic Next Topic >
dyer 
Copper - Posts: 206
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: May 24, 2002
Location: United States
Posted: July 20, 2005 at 4:08 PM / IP Logged  
Howdy,
For a formal report in my technical writing class at Texas A&M I am designing a guide to the "design and application of a vehicle security system" Part of my project is to obtain knowledge from professionals about what my guide should include. So here I am. It would be great if you guys could spout out some stuff to me about what you think is crucial knowledge when designing a vehicle security system. Not so much the installation aspect, but stuff like "knowing what types of sensors are most effective for desired detection"....stuff like that. Thanks guys
Trying to pass a class and include my passion while at it!
Dyer
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: July 20, 2005 at 4:58 PM / IP Logged  

Sensors & modules required:

  • Glass breakage
  • Tilt Sensor
  • Impact Sensor
  • Perimeter Sensor ( for convertibles )
  • Door / Trunk / Hood trigger
  • Pager system
  • SPDT Relays : For starter interrupt as well as ignition cut off ( if desired ) & fuel pump cut off
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
dyer 
Copper - Posts: 206
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: May 24, 2002
Location: United States
Posted: July 20, 2005 at 5:01 PM / IP Logged  
Hey I appreciate your responses, thanks for everything!
Dyer
gcorrea 
Silver - Posts: 436
Silver spacespace
Joined: May 22, 2004
Location: United States
Posted: July 20, 2005 at 5:17 PM / IP Logged  

hiding all of your wires, making it look as stock as possible is also a part of a good install.

gcorrea

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer