Connecting Accessories to Viper 791XV aux

Home / the12volt's Install Bay / Car Security and Convenience / Connecting Accessories to Viper 791XV aux (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

linuXshock

Member - Posts: 2

Joined: July 21, 2005

Location: United States

Posted: July 21, 2005 at 2:56 AM / IP Logged

im driving a 95 sentra.

I have the 791xv installed in it (by the dealer).

Soon I'll be installing new sets of fog lights and i was just wondering if i could use one of the auxilary channels on the alarm to use with the fog lights as an on/off switch. If im not mistaken the output on channel 4 and 5 are 200mA. Would the fog lights be too much to install as an auxilary accessory? How about strobe lights?

How many channels are programmable and which ones are they?

Any help will be greatly appreciated.

Powermyster

Silver - Posts: 962

Joined: April 06, 2005

Location: Ireland

Posted: July 21, 2005 at 3:39 AM / IP Logged

aux's are meant to be used with relays. you can turn on near anything with an aux and a relay.

the fog would be done like so ( most fog light will have to be wires with a relay anyway)

SPDT Relay

85 - (-)200mA output from alarm (can also put a switched neg to this p[in if you wanna use a switch too) Diodes might be needed for this

86 - constant 12V source

30 - constant 12V source

87 - lights

linuXshock

Member - Posts: 2

Joined: July 21, 2005

Location: United States

Posted: July 21, 2005 at 5:12 AM / IP Logged

thanks for info

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Connecting Accessories to Viper 791XV aux

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.