tach info

Home / the12volt's Install Bay / Car Security and Convenience / tach info (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

mbsaudio

Copper - Posts: 80

Joined: October 17, 2002

Location: Canada

Posted: November 28, 2002 at 4:15 PM / IP Logged

Does anyone know what it means when the info says 2 cylinder set for the tach. Is there some special hook up for this. I tried it on a 1999 windstar that said this, and had to go tachless because the remote would not pick up the tach signal. tach info -- posted image.

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: November 28, 2002 at 7:33 PM / IP Logged

This means that the tach signal is defaulted for a 2 cylinder tach signal pick up. The Windstar is a 4 cylinder so you will need to program the unit to pick up a 4 cylinder tach signal.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

mbsaudio

Copper - Posts: 80

Joined: October 17, 2002

Location: Canada

Posted: November 29, 2002 at 5:54 PM / IP Logged

Sorry Jeff Still have no idea what you're talking about. I don't see anything in the instal. manual about 2/4cylinder tach.

Back to Top

djfearny2

Silver - Posts: 810

Joined: September 23, 2002

Location: United States

Posted: November 29, 2002 at 7:19 PM / IP Logged

there is probable dip switches check that i dont know what alarm your using but it sounds like a cheep one sorry /. got what ya paid for. no tach is ok but in the winter when the car is cold it will be hard or your car may not start do to the cold start.

Jon

Installer/Help Technician

---coral springs florida---

mecp certification is not always needed. I have it and it has not helped me out at all. my experience out shines it.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

tach info

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.