power reference vs. mclass

Home / the12volt's Install Bay / Car Audio / power reference vs. mclass (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

wrathchild281

Copper - Posts: 241

Joined: February 02, 2005

Location: United States

Posted: July 28, 2005 at 11:51 PM / IP Logged

hey im not aware of the diference between these models from memphis when it comes to there co axial speakers. specifically the 6x9's. they both handle like 50 watts rms and the mclass are more expensive. does anybody know the difference? thanks

Back to Top

lwhite

Member - Posts: 7

Joined: July 28, 2005

Location: New Zealand

Posted: July 29, 2005 at 12:23 AM / IP Logged

i'd rather pay the extra for the mclass since they seem to have better imaging, les distortion, polyurethane my be bullet proof but kevlar is more stable cone (doesnt warp as much).

good luck :)

kenwood 9023r

RF 800a2

1 pair fusion jona lomu 6.5" 2ohm (fjl-65c)

RF t5002

2x fusion powerplant 12" DVC sub (ported)(fpw-1200)

Back to Top

DYohn

Moderator - Posts: 10,741

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: April 22, 2003

Location: Arizona, United States

Posted: July 29, 2005 at 10:20 AM / IP Logged

The difference is the M-class is Memphis' higher end line and the PR is Memphis' mid-level line. M-class is considered to be better by the manufacturer. I like the sound of M-class more; some people prefer the sound of the PR line. It's a matter of taste.

Support the12volt.com

Back to Top

wrathchild281

Copper - Posts: 241

Joined: February 02, 2005

Location: United States

Posted: July 29, 2005 at 11:17 AM / IP Logged

ok thanks what do u think would play louder while given the same amount of power. im looking for loud piercing mids and highs.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

power reference vs. mclass

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.