air bag

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / air bag (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Dead Eye

Member - Posts: 1

Joined: November 29, 2002

Location: United States

Posted: November 29, 2002 at 5:26 PM / IP Logged

I have a 1996 ford probe gt.The air bag's were stolen from the car, the problem is that the air bag light stays on all the time. i know i can remove the bulb but i don't want to do that. There must be a resistor i can install into the plug were the air bag was atttached. how does the system know if the air bag is hooked up or not? does it sence the resistence on the line if it does then a resistor can be installed.

life is to short so live it to the fullest.

djfearny2

Silver - Posts: 810

This member has made a donation to the12volt.com. Click here for more info.

Joined: September 23, 2002

Location: United States

Posted: November 29, 2002 at 7:21 PM / IP Logged

there should be a fuse for the air bags either one for the light alone or one for both just take that out i mean it sounds like youdont have any , anyways so it would not make a difference.

Jon

Installer/Help Technician

---coral springs florida---

mecp certification is not always needed. I have it and it has not helped me out at all. my experience out shines it.

securinu

Silver - Posts: 772

Joined: September 15, 2002

Location: United States

Posted: December 01, 2002 at 11:10 PM / IP Logged

actually you should probably replace them you will need them when you least expect it.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

air bag

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.