hardwire a roady2 in a 1997 F150

I would like to hard wire my roady2 to the radio harness of a 1997 F150 so that it will power on when I turn the engine on and power off when Inturn the egine off.  What are the wire colors on the harness tom achieve this.

Thanks.

jrip

http://www.installdr.com/Harnesses/Ford-Wiring.pdf

look to see which plug is in your truck and u will need use 12volt ignation wire and ground wire.

o yea roady2 runs off 6 volts so u need to do one of two thing use a cirgite lighter plug and wire it in and plug the roady2 in to it behind the radio or you can open up your roady plug and solder wires to the + - and run wires out and putt it back together and tape it all up