2006 Corvette

Home / the12volt's Install Bay / Car Audio / 2006 Corvette (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

mexi

Copper - Posts: 156

Joined: August 23, 2003

Location: United States

Posted: August 02, 2005 at 5:21 PM / IP Logged

Need help 06 vette not starting after installing system. Dont know if this has anything to do with the stereo.

mexicang

jstruckman

Copper - Posts: 465

Joined: May 03, 2004

Posted: August 02, 2005 at 5:34 PM / IP Logged

You should need to use a OnStar module or a chime module but never heard of one not starting after pulling radio. You might check to see if you popped any fuses.

Jazzy

03taurus

Member - Posts: 29

Joined: June 13, 2005

Location: United States

Posted: August 02, 2005 at 7:36 PM / IP Logged

Make sure that the OEM stereo isn't necassary for the vehicle to start. Cars these days are integrading everything into the OEM headunit.

For instance, the 04'+ Ford Taurus has the airbag wiring going though the OEM headunit, so you have to hide the guts of the OEM stero inside the dash somewhere if you want to go with an aftermarket headunit.

My car has the digital climate control issue that would have to be custom fabricated back into the dash some way. 2006 Corvette -- posted image.

tcss

Silver - Posts: 1,623

Joined: June 07, 2004

Location: United States

Posted: August 02, 2005 at 8:04 PM / IP Logged

Did you disconnect the battery during the install/

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: August 02, 2005 at 9:46 PM / IP Logged

Back track and re-install the OEM HU and see if the Vette starts. If it doesn, then you've found your problem. If not, then you can start looking elsewhere. Post your results.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

mexi

Copper - Posts: 156

Joined: August 23, 2003

Location: United States

Posted: August 02, 2005 at 9:56 PM / IP Logged

did disconnect the baterry. we also tried putting everything back to factory. the factory headunit has always been in the car.

mexicang

mexi

Copper - Posts: 156

Joined: August 23, 2003

Location: United States

Posted: August 02, 2005 at 9:57 PM / IP Logged

its not getting fuel

mexicang

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: August 02, 2005 at 10:01 PM / IP Logged

You didn't mess with the ignition wire harness did you ? Sounds like the Passlock system. So it cranks but it doesn't run..... right ?

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

mexi

Copper - Posts: 156

Joined: August 23, 2003

Location: United States

Posted: August 02, 2005 at 10:13 PM / IP Logged

correct it cranks but doesnt start. it also ran out of gas but we filled it up. still has factory headunit. we add a soundgate piece for signal.

mexicang

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: August 02, 2005 at 10:17 PM / IP Logged

Sounds like the Passlock system to me, but not sure why taht would go on you if you replace the HU. Possibly when you unplugged the OEM HU ( I'm guesing you had to do this ) this would have set off the anti theft ?? Just shooting in the dark here.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.