'04 Camry Trunk Release

Home / the12volt's Install Bay / Car Security and Convenience / '04 Camry Trunk Release (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

tbo1

Member - Posts: 9

Joined: November 08, 2004

Location: United States

Posted: August 04, 2005 at 3:08 PM / IP Logged

how do i wire a 5wi conection for trunk release in an '04 Camry. i know the wire and the location according to directwires. any help would be greatly appreciated

tbo

Back to Top

profuse007

Gold - Posts: 2,015

Joined: October 20, 2002

Location: Texas, United States

Posted: August 04, 2005 at 3:16 PM / IP Logged

the trnk line must be cut in half and interrupt w/ a 5wire relay.

85- trunk oupt from alarm unit

86- 12volt constant

30- 12v constant

87a- objective wire goin toward the dash

87- objective wire goin toward the trunk popper

Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

Back to Top

tbo1

Member - Posts: 9

Joined: November 08, 2004

Location: United States

Posted: August 04, 2005 at 4:07 PM / IP Logged

thank you much.

tbo

Back to Top

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: August 06, 2005 at 9:53 AM / IP Logged

you need to also trigger the trunk key sence wire with the trunk trigger BEFORE the relay. otherwise the factory security (if it has it) will go off. Its the green and white wire just below the blue/white trunk pop wire. grab on to your trunk pop trigger in front of the relay and diode isolate, cathode facing your alarm.

Back to Top

tbo1

Member - Posts: 9

Joined: November 08, 2004

Location: United States

Posted: August 06, 2005 at 2:28 PM / IP Logged

thank you KarTuneMan. you guys been helpful. much appreciated.

tbo

Back to Top

Chris Luongo

Platinum - Posts: 3,746

Joined: May 21, 2002

Location: Massachusetts, United States

Posted: August 07, 2005 at 11:59 AM / IP Logged

KarTuneMan's tip is correct.

Factory alarm is standard only on the XLE "luxury" model.

LE, SE, and base don't have the alarm from the factory.

You might encounter a dealer-installed Toyota VIP alarm one some of these; I'm not sure if it will have the key-cylinder-disarm wire though.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

'04 Camry Trunk Release

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.