amp specs

Home / the12volt's Install Bay / Car Audio / amp specs (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Steelcity

Copper - Posts: 73

Joined: August 03, 2005

Location: United States

Posted: August 09, 2005 at 1:57 PM / IP Logged

I have checked 3 different sites including the mfg's site to try and find the rms of this amp bridged at 4 ohms and have gotten 3 differnt figures 150-250 rms. Phoenix gold r2: 52

does anyone know what the correct figure is? I hope its not 150 watt rms.

Back to Top

DYohn

Moderator - Posts: 10,741

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: April 22, 2003

Location: Arizona, United States

Posted: August 09, 2005 at 2:02 PM / IP Logged

Yes, it is 150 watts and it cannot be bridged into any lower impedence load. HERE's the manual.

Support the12volt.com

Back to Top

Steelcity

Copper - Posts: 73

Joined: August 03, 2005

Location: United States

Posted: August 09, 2005 at 2:10 PM / IP Logged

Damn is that phoenix gold 150 rms going to be enough to power a 400 watt sub and get decent bass? I looked at the mfg site and saw 250 rms and thought that was rms.

Back to Top

Master Asylum

Silver - Posts: 400

Joined: November 05, 2004

Location: United States

Posted: August 09, 2005 at 2:25 PM / IP Logged

I believe that'd be a matter of opinion... For me, probably not. For some, possibly plenty. :)

1998 Monte Carlo w/

Eclipse CD8454

2xRockford 5.25" Power 2-way T152C

2xRockford 6"x9" Punch 3-way FRC4369

1xMemphis 16-MCH1300 5-channel

2xKicker 12" L5 Solobaric-2 Ohm

Back to Top

Steelcity

Copper - Posts: 73

Joined: August 03, 2005

Location: United States

Posted: August 09, 2005 at 2:27 PM / IP Logged

Not really looking to shake the car. Just looking for some good bang from the rear. It will be going in a jeep liberty open cargo area.

Back to Top

Steelcity

Copper - Posts: 73

Joined: August 03, 2005

Location: United States

Posted: August 09, 2005 at 2:59 PM / IP Logged

Ok need some advice quick. Worried this phoenix gold 150 rms is to small to power the sub I'm getting. Which is better

Ma589I or the phoenix gold r2 52 or rockford fosgate 201S running at 4 ohm bridged 400 watt rms sub

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

amp specs

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.