2000 mazda protege keyless entry

Home / the12volt's Install Bay / Car Security and Convenience / 2000 mazda protege keyless entry (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

Methree

Member - Posts: 15

Joined: August 09, 2005

Location: United States

Posted: August 10, 2005 at 9:44 PM / IP Logged

ok i got it. but with the relays do i attach both 30s to the same GREEN/ red wire? or do i bind both together and run it to the GREEN/ red wire? and i run the 1.5k in the lock output line before it hits the GREEN/ red wire? lmk thanks.

Methree

Member - Posts: 15

Joined: August 09, 2005

Location: United States

Posted: August 11, 2005 at 8:53 PM / IP Logged

ok. starting from scratch. if anyone has ever done a 2000 mazda protege keyless entry please let me know a diagram for 2 relays. i have the 1.5k resistor and everything, i just need to know where to put all of the wires on the 2 relays. please anyone help me out with this situation T.T.

mo12v

Platinum - Nominee - Posts: 2,748

This member consistently provides reliable information

Joined: September 30, 2003

Location: Afghanistan

Posted: August 11, 2005 at 9:40 PM / IP Logged

Yes both Lock & Unlock wires from Relays go together and hook to Vehicles GREEN / Red wire

2 SPDT RELAYS:

LOCK: Relay 1

PIN 87 = Ground

PIN 30 = 2.2 or 1.5 ohm Resistor to Vehicles GREEN / Red wire

PIN 85 = Negative Lock Output from Unit

PIN 86 = Constant 12 volt ( + )

UNLOCK: Relay 2

PIN 87 = Ground

PIN 30 = to Vehicles GREEN / Red wire

PIN 85 = Negative UNLock Output from Unit

PIN 86 = Constant 12 volt ( + )

Don't Learn from Others Mistakes

You Might Be the One That Knows.

Methree

Member - Posts: 15

Joined: August 09, 2005

Location: United States

Posted: August 11, 2005 at 9:59 PM / IP Logged

ok. how do i get negative output from my alarm/turn positive outputs into negative outputs?

Methree

Member - Posts: 15

Joined: August 09, 2005

Location: United States

Posted: August 11, 2005 at 10:01 PM / IP Logged

i mean, how do i turn postive outputs from my alarm into negative outputs? do i simply switch the 12v source to a ground? lmk thanks for all the great info mo12

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2000 mazda protege keyless entry

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.