the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Window rollup w/ radio on and more


Post ReplyPost New Topic
< Prev Topic Next Topic >
Clif 
Member - Posts: 46
Member spacespace
Joined: November 30, 2004
Location: United States
Posted: August 12, 2005 at 1:46 AM / IP Logged  
heres another little additon that i made to the relays, made it so that my windows will go up when i arm my alarm. also this will keep the radio on after ignition is off, and i can also turn the acc on remotely. Window rollup w/ radio on and more - Last Post -- posted image.
think i might add it so i can make them go down to, but that will be a little bit tricky, unless i just wire it up to another aux chan on my alarm. installing this and one for my high and low beems tomarow, ill see how it goes.....
hmmm.... was that the right wire?
auex 
Platinum - Posts: 5,041
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 23, 2002
Location: Arizona, United States
Posted: August 14, 2005 at 10:14 PM / IP Logged  
Well, you should really use a window module and use ground when armed. Using just relays to control windows is not a good idea. Also it is not correct. Most windows are reverse polarity so just sending power won't work.
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
blazeronspokes 
Copper - Posts: 102
Copper spacespace
Joined: February 09, 2005
Location: United States
Posted: September 14, 2005 at 8:38 PM / IP Logged  
if you don't use the power window modules you may run the chance of burning those power window motors when it sets because you don't have anything to tell the window to stop.
KPierson 
Platinum - Posts: 3,527
Platinum spaceThis member consistently provides reliable informationspace
Joined: April 14, 2005
Location: Ohio, United States
Posted: September 23, 2005 at 9:44 PM / IP Logged  
Definately should have some sort of current monitor to shut off the output of the motors when the current spikes (from hitting the top).  Not doing so will lead to a short life span of your window motors.
Kevin Pierson

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, April 21, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer