the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2000 Ford F150 and Audiovox AX500


Post ReplyPost New Topic
< Prev Topic Next Topic >
fpcelica 
Member - Posts: 21
Member spacespace
Joined: August 12, 2005
Location: United States
Posted: August 12, 2005 at 9:15 PM / IP Logged  
it seems that the alarm system only supports cround or positive 3wire door locks, and ive been reading that the f150 is 5wire + how do i make the alarm compatiable with the truck?
fpcelica 
Member - Posts: 21
Member spacespace
Joined: August 12, 2005
Location: United States
Posted: August 13, 2005 at 1:40 AM / IP Logged  

bobk wrote:
Look at door locks at the left side of this forum.

okay i dont really understand to get it to work... could you help me?

fpcelica 
Member - Posts: 21
Member spacespace
Joined: August 12, 2005
Location: United States
Posted: August 13, 2005 at 12:46 PM / IP Logged  

bobk wrote:
Did you look at the diagram, If you did what don't you understand. Be more informative.

well just ell me how to hoook up to get it to work, it seem that the alarm only gives a low voltage + or - and i have it hook up and i push the button and the door dont unlock, but when i test the wire and push the unlock button it gives a read so i know im in the right wire. but the system doesnt seem to unlock it. the system has a green a blue and a blurered wire.. know any thing about this?

fpcelica 
Member - Posts: 21
Member spacespace
Joined: August 12, 2005
Location: United States
Posted: August 15, 2005 at 12:10 AM / IP Logged  

bobk wrote:
How did you hooook up the alarm to what? Did you use relays? Need a hole lot more info if you expect help. Most alarm only have two wires for door locks if they don't have on board relays.

ok now i think ihave the right relay it came with my viper 791xv i didnt need it on the car that one went on, its a dei 451m, it says 5 wire harness. is this what i am looking for?.. and how would i hook this up to the wires in the truck with only 2 wires that "say door lock and unlock" these are the wires i found posted on the internet the pinkyellow and pickgreen

on the back it says v/b=lock/unlock,gr/blk=lockoutput, Wht/Blk=locknormally closed #87a, BLu/blk unlock output, Brwn/blak=unlock normally closed #87a


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, May 19, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer