Galaxy 3000 2w Remote Issue

Spent all day installing alarm. Good job if I must say so myself, except the alarm does not acknowledge the remotes. The manual refers to Programing #21 to press button two on your one way remote to setup  FM remotes. Only problem is the only remotes that came with unit are both 2 ways. Certainly there has to be another way to fire up the FM remotes?????Mark

how did you solve this problem? is there some sort of antena that needs to be wired in for the fm remotes?

Yes there is a module aprox. 2"x2" that wires to the alarm panel and then it connect to the ribbon that goes to the antena.Mark

does this 2"x2" module plug in where the scynet port is? does it have 5 pins on one side, and two 3 pin connectors on the other?

Correct, It does plug into the Scy Port, then plug into either one of the 3 pins on the  FM module. Then of course the ribbon plugs into the FM module on the other end.Mark

ok, i see, but then the antenna has two, two pin wires on it too. one is blue and one is red, where do those go?

Ryan, You have your choice of where you want your Led?Valet to be. On the antenae or remotely. You can use either or one or the other.Mark