2000 montero sport factory alarm disarm

Home / the12volt's Install Bay / General Discussion / 2000 montero sport factory alarm disarm (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

laoreflxzn

Member - Posts: 12

Joined: June 30, 2002

Location: United States

Posted: December 02, 2002 at 12:11 PM / IP Logged

Can someone help me figure out where to locate the disarm wire for the factory alarm? Trying to remote start but the factory alarm kicks in and stops it. Also need to know where to locate the door lock and unlock. Thanks

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: December 02, 2002 at 12:18 PM / IP Logged

|POWER LOCK|BLACK/ red *1 |- |right rear side of fuse box |
|POWER UNLOCK|BLACK/ blue *1 |- |right rear side of fuse box |
|FCTRY ALRM DISARM|BLACK/ red |- |drivers kick panel |

*1 Warning! When doing door locks on these trucks make sure you DO NOT cycle the door locks rapidly. This may cause the ETACS module to fail and the door locks will no longer work. Also, you MUST add diode's to the lock and unlock output from our units to prevent damage to the ETACS. Make sure you insert the diode's with the cathode (stripe side) towards our unit.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

securinu

Silver - Posts: 772

Joined: September 15, 2002

Location: United States

Posted: December 02, 2002 at 6:11 PM / IP Logged

i have some dfferent color for the disarm not sure if sport and limited are different but this profile says it is sport colors. i think jeff uses dei wire program i use wiremagic. hopefully one of them will work for you

lock=BLACK/ red

unlock=BLACK/ blue

disarm=blue yellow

all 3 are ( - ) and in the driver kick or @ alarm connector behind left dash speaker by the knee

although i have never seen a montero with an alarm i believe they are dealer installed the plug is behind the left dash speaker by the knees. also like jeff said make sure you use diodes or relays the etacs module is very sensitive.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2000 montero sport factory alarm disarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.