2005 G35 coupe VSS

Hello, Installing a racing computer that needs the vss (speed sensor).  Need to know if I can find this wire coming from the cluster and the color.

Car is a 2005 Infinity G35 Coupe

Any help would be greatly appreciated.

Regards,

C2K

DIRECTWIRE™ WIRING INFORMATION - INFINITI / G35 COUPE / 2005 / Accessory 12volts WHITE/ blue (40A)   +   ignition harness Ignition BLACK/ red   +   ignition harness Parking Lights+ RED / blue   +   driver kick, harness to rear Parking Lights- N/A        Headlight RED / black (L), red (R)   +   lights or IPDM E/R, gray 16 pin plug Notes: The IPDM E/R (Intelligent Power Distribution Module Engine Room) is between the passenger fender and the battery. Trunk/Hatch Release pink   -   BCM, pin 30 Notes: The BCM (Body Control Module) is in the driver kick panel. The trunk release motor wire is GREEN / WHITE (+) at the BCM, pin 68. Power Sliding Door N/A        Speed Sense WHITE/ green   2P   radio harness Wipers purple (L), blue/black (H)   +   motor or IPDM E/R, gray 16 pin plug Notes: The IPDM E/R (Intelligent Power Distribution Module Engine Room) is between the passenger fender and the battery. LF Window up/dn see notes        Notes: Extended triggers on the power lock/unlock wires will roll the windows up/down. Use validity channels to control. RF Window up/dn see LF window up/dn notes        LR Window up/dn N/A        RR Window up/dn N/A        Sun Roof open/close motor part of module        Sun Roof Limit/close N/A        Memory Seat 1 N/A        Memory Seat 2 N/A        Memory Seat 3 N/A        Interface Module: Category: Immobilizer Bypass Required: Yes Type: Transponder Part #: 556UW Alternate Part1 #: 555U Alternate Part2 #: DesignTech 20402 Alternate Part3 #: DesignTech 29402 Notes: Standard on all models.        This wiring information is being provided free of charge on an "as is" basis, without any representation or warranty. It is your responsibility to verify any circuit before interfacing with it using a digital multimeter. Directed electronics, Inc. assumes no responsibility with regards to the accuracy or currency of this information. Proper installation in every case is and remains the responsibility of the installer. DEI assumes no liability or responsibility resulting from improper installation, even in reliance upon this information. Be careful whose advice you buy, but be patient with those who supply it.