01 Cavalier Alarm Install

forget about the other forums theres nothing like the 12volt.com. its weird that your starter relay kill does not have a #30 pin, your relay should be wired like this,  87a to ignition side of starter, 87 has no connection, 85 is your alarms input, 30 goes to starter side, and 86 goes to 12volts when the key is in the start and run position only. 

your  ignition harness runs along the steering column.

they call them hazzard lights but theyre your parking lights. you can get this wire at the fuse block. ill get back to you on what color wire to look for.

looks like your parking light wire is brown.

starter wire is yellow.

ignition wire is pink.

you can wire both white wires from the alarm together and wire them to your brown parking light wire.

cut you starter wire(yellow),connect the key side to pin#87a,starter side goes to #30, orange wire from alarm to #85, #86 receives 12 volts at crank,you can tap into the key side of the starter wire (yellow).thats it.check out the diagrams on starter kills in this site so you know and understand what im telling you.

please tell me youre using a multimeter to find your wires.

did the relay come pre wired? pin#87 and #87a say thick yellow. were these "thick yellow" wires pre wired into the relay when you got it?

we might be looking at something else other than a starter kill relay. since the relay is missing pin #30. cant make out what it says at the end of "thick yellow" from pin #87a.

stick to the starter kill diagram described on this site under starter kills.