the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

'00 galant bypass programming


Post ReplyPost New Topic
< Prev Topic Next Topic >
millerba76 
Member - Posts: 5
Member spacespace
Joined: August 03, 2005
Location: United States
Posted: August 18, 2005 at 8:38 PM / IP Logged  
I'm trying to program an Omega bypass module for remote start and am having no luck (surprise, surprise). It seems like the car is not going into program mode. I followed the procedure that came with the module and tried every other combination I could think of.
If anyone knows what the correct procedue is for sure, please let me know.
b
mo12v 
Platinum - Nominee - Posts: 2,748
Platinum - Nominee spaceThis member consistently provides reliable informationspace
Joined: September 30, 2003
Location: Afghanistan
Posted: August 18, 2005 at 8:50 PM / IP Logged  
Which OMEGA ByPass are U using?
If it is a Transponder ByPass,  Not all Galants came with Transponder
MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
millerba76 
Member - Posts: 5
Member spacespace
Joined: August 03, 2005
Location: United States
Posted: August 19, 2005 at 5:10 PM / IP Logged  
The Galant I was working on had a transponder system or else I wouldn't have beedn able to wrao the antennae wire around the reciever.
The unit was an IB-umit by Omega. The program sequence given with the unit was. First key on and hold 5 seconds. Turn second key on and hold seven seconds. power primary ignition wire and hold bypass module to reciever for seven seconds or until security light comes on and then goes off.
   This procedure was not correct. I talked to the mental giant at tech support and he had no idea. ( said to call Mitsubisi!)
   If anyone can help please let me know.
b
mo12v 
Platinum - Nominee - Posts: 2,748
Platinum - Nominee spaceThis member consistently provides reliable informationspace
Joined: September 30, 2003
Location: Afghanistan
Posted: August 19, 2005 at 6:09 PM / IP Logged  
If U are using the OMEGA IB-PKU-MIT .........Good Luck.
It is my understanding that it will only work with '02 & up ByPass for Galant.
If you are going to try & program again, be sure and hold unit to Ignition Switch with the little hole in the IB-PKU facing the Switch
You probably would be better off with the PASS-4 and lose a key
MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer