the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Which subwoffer is Better


Post ReplyPost New Topic
< Prev Topic Next Topic >
eeh1025 
Copper - Posts: 113
Copper spacespace
Joined: November 26, 2002
Location: United States
Posted: December 02, 2002 at 8:52 PM / IP Logged  
Hi there which sub woffer do you think is better Audiobahn AW1206Q, Alpine Type-R SWR-1241D or a JL audio 12 W6. thanks alot. 
bberman1 
Gold - Posts: 2,314
Gold spacespace
Joined: March 11, 2002
Location: United States
Posted: December 02, 2002 at 9:37 PM / IP Logged  
Out of all the subs listed above the Audiobahn will move the most air. I have the AW1208Q’s and I can tell you that they hit and they sound clean too.  Are you looking for spl or sq?
eeh1025 
Copper - Posts: 113
Copper spacespace
Joined: November 26, 2002
Location: United States
Posted: December 03, 2002 at 4:47 AM / IP Logged  

Hey bberman1.  What is really the difference Between SPL and SQ I want Something that tumps really lound and sound good that can be heard coming a 1mile down the road.  Thanks alot for your help. 

Aw1208q 
Copper - Posts: 42
Copper spacespace
Joined: August 06, 2002
Location: United States
Posted: December 03, 2002 at 8:59 AM / IP Logged  
SPL is strictly the louder the better. SQ is sound quality which is not nearly as loud as SPL but will sound alot better to the ear. The Audiobahn AW1206Q will thump alot harder than the other subs you listed. It is not the best sub for SQ but it can compete with some of the best out there. I would suggest the 08s over the 06s. They may cost alittle more but it is well worth the extra money. I am running 3 AW1208Qs pushed by 2 A18001DQ and they hit hard and you can hear me coming a mile down the road.Which subwoffer is Better - Last Post -- posted image.
bberman1 
Gold - Posts: 2,314
Gold spacespace
Joined: March 11, 2002
Location: United States
Posted: December 03, 2002 at 10:27 AM / IP Logged  
What you looking for is SQ/SPL system, have to agree with AW1208Q I would go with the 08 over the 06 worth the extra money and it will hit very hard. But they are power hungry so be sure to get a amp that will put out enough juice, such as the Audiobahn A18001DQ
eeh1025 
Copper - Posts: 113
Copper spacespace
Joined: November 26, 2002
Location: United States
Posted: December 03, 2002 at 11:51 AM / IP Logged  
Thanks alot guys. One more question if i go with the 2 AW1208Q would i need just on Audiobahn A18001DQ or 2.  and i need 2, how would the Audiobahn A2300HCG 2-Ch Or the Audiobahn A2X600HQ. thank alot.
bberman1 
Gold - Posts: 2,314
Gold spacespace
Joined: March 11, 2002
Location: United States
Posted: December 03, 2002 at 4:22 PM / IP Logged  
It’s a good choice. I would suggest hooking up one A18001DQ for each one of your subs that’s a total of 2 amps. If you run that set up you will be amazed at what you have.
Aw1208q 
Copper - Posts: 42
Copper spacespace
Joined: August 06, 2002
Location: United States
Posted: December 03, 2002 at 4:40 PM / IP Logged  
the 08s need to be run in odd numbers. like 1 1208 or 3 or 5. this is due to they r dual 2ohm voice coals. if you just want 2 1208s get 2 A18001DQ and it will knock hard as hell.Which subwoffer is Better - Last Post -- posted image.
eeh1025 
Copper - Posts: 113
Copper spacespace
Joined: November 26, 2002
Location: United States
Posted: December 03, 2002 at 9:03 PM / IP Logged  

Hey i just bought 2 A18001DQs and two Audiobahn 1208s.  i should get them in a few days.  I was wondering what is the best  box for these subs.  sealed, ported or bandpass, and what measurments should i go with.  thanks alot you guys. 

bberman1 
Gold - Posts: 2,314
Gold spacespace
Joined: March 11, 2002
Location: United States
Posted: December 04, 2002 at 12:50 PM / IP Logged  
Personally I have tried both ported and sealed and I like the way that they sound sealed. They are designed to run ported but it will not harm them to run them in a sealed enclosure. If you go ported they need 3cu/ft per chamber and sealed 1 cu/ft per chamber here is a link to the box specs page for the subs. Off this page you can also get the port specs http://www.audiobahninc.com/tech/Audiobahn2002boxspecs.pdf You made a good choice and will be very happy once you get everything going. If you need any more help let me know and I will be glad to assist you.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, May 15, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer