Big Alarm problem

I got a road rage alarm from ebay, and nothing works when. The alarm turns, and when i taped the door triggers (+,-) into the dome light wires and open the door, the alarm wont go off. Also when i plug in the ignition trigger into the cigeratte lighter wire and turn the key, the alarm wont go off. Does anyone know what can be wrong??? My brother told me that all the wires have to be attached before i plug the harness into the brain, is this rite?Pioneer Premier TS-w3004spl, Bass Slammer vented, Kenwood KDC MP-4028, and a KAC-9152d.

JdM xplod b01 wrote: The alarm turns, and when i taped the door triggers (+,-) into the dome light wires and open the door, the alarm wont go off. Also when i plug in the ignition trigger into the cigeratte lighter wire and turn the key, the alarm wont go off.

Why would you " plug in the ignition trigger into the cigeratte lighter wire "??

That would Disable your Alarm................You probably need to READ your Installation Instructions CAREFULLY and get a TECH sheet on your car FIRST..........Mark the wires you will need on the Tech Sheet or Unit .........Ask questions ................Then Install

MO

Don't Learn from Others Mistakes

You Might Be the One That Knows.

cuz the cigerrette lighter turns on when they key is on the 1 position, and thats what the ignition trigger is for, it sets off the alarm when som1 tries to turn on/ start the car. If i look stupid doin it, i dont kno n e other place to put it.Pioneer Premier TS-w3004spl, Bass Slammer vented, Kenwood KDC MP-4028, and a KAC-9152d.

Yea it is the rral-400 into a 96 altima.Pioneer Premier TS-w3004spl, Bass Slammer vented, Kenwood KDC MP-4028, and a KAC-9152d.

RED = White at Ignition Switch

BLACK = GROUNDYELLOW = Black / Red at Ignition SwitchWHITE = Red / Blue at Light SwitchBROWN = SirenGREEN = Red / White at Driver Kick PanelBLUE = Gray / Red UNLOCK at Door Lock Control Unit Behind Driver Dash ( small set of wires )GREEN = Gray / Blue LOCK at Door Lock Control Unit Behind Driver Dash ( small set of wires )

Hook up these wires and ( if you haven't fried it ) it should work.

The rest of the AL-400 wires can be hooked up later

MO

Don't Learn from Others Mistakes

You Might Be the One That Knows.

so the red wire doesnt go directly to the battery? Pioneer Premier TS-w3004spl, Bass Slammer vented, Kenwood KDC MP-4028, and a KAC-9152d.

It can if you want............ORWhite at Ignition Switch is Constant alsoMO

Don't Learn from Others Mistakes

You Might Be the One That Knows.

Thnx yall, i got it to work doin what u said.Pioneer Premier TS-w3004spl, Bass Slammer vented, Kenwood KDC MP-4028, and a KAC-9152d.