flush mounting 12's

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / flush mounting 12's (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

05honda

Copper - Posts: 100

Joined: May 27, 2005

Location: United States

Posted: August 26, 2005 at 5:12 PM / IP Logged

I need to flush mount a 12" sub into the box I am making......what are the exact sies of the rings that i will need

Any help would be nice.....thanks

Back to Top

elmaschingon_18

Member - Posts: 21

Joined: March 28, 2005

Location: United States

Posted: August 26, 2005 at 5:31 PM / IP Logged

Hey Auther,

tell you the truth, your gonna have to measure the diameter of the subs. Basically all subs are different because of design preference by the manufactor. Or find someone on the forum that has made rings before of the same woofer.

happy glassin'

sanding sucks!

Back to Top

Search for other posts by elmaschingon_18

05honda

Copper - Posts: 100

Joined: May 27, 2005

Location: United States

Posted: August 26, 2005 at 9:13 PM / IP Logged

Thanks for the input.....in that case has anyone made rings for 12" kickers......

Back to Top

Clif

Member - Posts: 46

Joined: November 30, 2004

Location: United States

Posted: August 27, 2005 at 2:04 AM / IP Logged

you will need to make 2 rings, one for the sub to screw to and one that will go around the sub to make it flush. If you look in your manual for one of your subs, it will tell you your outer diam. just ad about an 1/8th to a 1/16th of and inch all the way around for propper clearence. and glass or resin or glue your rings together. and bam you got them flush mounted!

hmmm.... was that the right wire?

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

flush mounting 12's

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.