the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

3 or 4 amps to one speaker?


Post ReplyPost New Topic
< Prev Topic Next Topic >
Blowntweeters 
Silver - Posts: 650
Silver spacespace
Joined: June 03, 2005
Location: Nevada, United States
Posted: August 28, 2005 at 11:07 AM / IP Logged  

one other thing you should know is that the enclosure can make or break your system. jeffchilcotts is suggesting good products  the only thing  that i would say is you may want to be a bit lower on RMS wattage so you don't have to upgrade your alternator and or battery i would suggest about 400 to 600 watts RMS and using a slot vented enclosure "box" for your sub .with this wattage and type of enclosure and what music you listen to you should get the results your looking for

'

1974 ford pinto 4 15" punch Z power punch bd 1001 pioneer DEH-6700
T.Hill 
Copper - Posts: 268
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: February 21, 2003
Location: Missouri, United States
Posted: September 07, 2005 at 9:48 AM / IP Logged  
What about a 12" SE from Resonant Engineering with a TX1005D from Hifonics? $185 + $175=$360=$90 saving over what you were willing to spend. Hifonics is high end caraudio but it isn't the worst either.
Pioneer DEH-P980BT, Zapco DCREF1000.4,Pioneer TS-C520PRS, Adire Extremis, MTX TA91002, TC Sounds TC-3000 15"
Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer