the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Omega Max E


Post ReplyPost New Topic
< Prev Topic Next Topic >
Dealersedge 
Member - Posts: 1
Member spacespace
Joined: April 06, 2005
Location: Canada
Posted: September 13, 2005 at 3:26 PM / IP Logged  
diode isolation??
jacktowncruiser 
Member - Posts: 9
Member spacespace
Joined: October 05, 2003
Location: United States
Posted: September 28, 2005 at 2:01 PM / IP Logged  
well the drivers door and the 3 other doors are on seperate wires...but for some reason the trigger to the drivers door doesn't light up the domelight...so I just hooked the other doors to the alarm...I think I had the smart trigger port connected and that was causing a false alarm
DodgeCrazy 
Member - Posts: 4
Member spacespace
Joined: June 26, 2004
Location: United States
Posted: September 28, 2005 at 3:48 PM / IP Logged  
I am having an issue with my Omega Max remote start/car alarm. I really hope you huys can help.
I recently programmed the echo 2 transciever to the unit following the steps in the instruction manual. The Echo 2 did not work properly because there is something that plugs into the omega unit for the echo 2 to work correctly, which I did not have. I then reprogrammed the original transmitter back to the omega max and since then, my remote start does not work. I can activate the remote start via transciever, the engine will crank run for 3 seconds, then engine kills, and the omega will restsart the engine allowing this process to continue until I terminate the remote start via transceiver. why is it doing this ?? if you need more information please let me know
Thanks
jacktowncruiser 
Member - Posts: 9
Member spacespace
Joined: October 05, 2003
Location: United States
Posted: September 29, 2005 at 12:41 AM / IP Logged  
sounds like you have more than one ignition or accessories wire...my crown vic was doing the samething into I found the second ignition wire and ran a relay from the satellite ports
jacktowncruiser 
Member - Posts: 9
Member spacespace
Joined: October 05, 2003
Location: United States
Posted: September 29, 2005 at 12:45 AM / IP Logged  
oh yeah what kind of car is it?
draasch 
Gold - Posts: 2,172
Gold spacespace
Joined: February 07, 2003
Location: Florida, United States
Posted: October 31, 2005 at 12:35 AM / IP Logged  
if you dont have it worjked out yet, e-mail me and i will help walk you through the set-up that you have....
sounds like the problem is in the install and not the unit.....
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt
Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, July 19, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer