compustar light output

Home / the12volt's Install Bay / Car Security and Convenience / compustar light output (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

six2six

Copper - Posts: 60

Joined: April 05, 2004

Location: Canada

Posted: September 06, 2005 at 5:14 PM / IP Logged

I have a 97 Mazda 626 with LED turn signal mirrors. I was wondering if anyone knows how I can hook up my Compustar park light output to the mirrors? Right now the mirrors are hooked up to the left and right turn signal output wire at the flasher unit under the dash. Any info on this will be greatly appreciated. Thanking you in advance.

Back to Top

six2six

Copper - Posts: 60

Joined: April 05, 2004

Location: Canada

Posted: September 07, 2005 at 10:05 PM / IP Logged

can anyone help me out?

Back to Top

saleengt

Copper - Posts: 73

Joined: December 10, 2002

Location: United States

Posted: September 08, 2005 at 6:23 PM / IP Logged

well most likley your mirrors just require positive and ground..so im sure if you run a positive signal from your compustar park light it should flip them on when it give a positive brake light signal

Back to Top

six2six

Copper - Posts: 60

Joined: April 05, 2004

Location: Canada

Posted: September 08, 2005 at 10:03 PM / IP Logged

thought of that but the mirrors are hooked up to the flasher unit which also puts out a positive signal to make the mirrors blink with the turn signals. would that cause a problem.

Back to Top

saleengt

Copper - Posts: 73

Joined: December 10, 2002

Location: United States

Posted: September 09, 2005 at 4:33 PM / IP Logged

dioide isolate the wire from the brain so the brain cant get feedback from your flasher..id wire it up past the falser with the diode

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

compustar light output

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.