question on a 791

Home / the12volt's Install Bay / Car Security and Convenience / question on a 791 (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

Strizzy23

Member - Posts: 42

Joined: February 12, 2004

Location: United States

Posted: September 13, 2005 at 5:28 PM / IP Logged

i just got done installing the remote start alarm. my issue is when i remote start it the lights flash until i put the key in is that suppose to do that ?

Thanks Dave

Steve23

Member - Posts: 43

Joined: July 30, 2005

Location: United States

Posted: September 13, 2005 at 5:36 PM / IP Logged

Yes, it comes programmed to do that. You can change it in programming mode so they stay on.

Strizzy23

Member - Posts: 42

Joined: February 12, 2004

Location: United States

Posted: September 13, 2005 at 5:44 PM / IP Logged

thanks i thought i mess something up. i have one more issue with the shock sensor i hit the windsheild and it wont warn is this because i dont have door pins?

Steve23

Member - Posts: 43

Joined: July 30, 2005

Location: United States

Posted: September 13, 2005 at 5:50 PM / IP Logged

Does it warn away if you hit another part of your car? Where did you mount the sensor? Is it tightly secured?

Strizzy23

Member - Posts: 42

Joined: February 12, 2004

Location: United States

Posted: September 13, 2005 at 5:54 PM / IP Logged

I strap it to the harness under the colum its set how it came from the factory

Steve23

Member - Posts: 43

Joined: July 30, 2005

Location: United States

Posted: September 13, 2005 at 6:09 PM / IP Logged

Im no pro here but I thought they had to be attached to a solid surface on the car somewhere. For instance I stuck mine to the under side of my dash, a nice solid spot, with some double sided 3m tape and it works as it should.

Strizzy23

Member - Posts: 42

Joined: February 12, 2004

Location: United States

Posted: September 13, 2005 at 6:23 PM / IP Logged

the chevy trucks are know to have bad door pins i got new ones on order should be here tomorow i hope thanks for the fast help

blazeronspokes

Copper - Posts: 102

Joined: February 09, 2005

Location: United States

Posted: September 15, 2005 at 1:06 PM / IP Logged

the reason it doesn't warn is because the loop end of the harness isn't facing the right direction.

Search for other posts by blazeronspokes

tom small

Member - Posts: 36

Joined: April 03, 2003

Location: United States

Posted: September 20, 2005 at 8:52 PM / IP Logged

Also, shock sensor does not work during remote start...

Strizzy23

Member - Posts: 42

Joined: February 12, 2004

Location: United States

Posted: September 24, 2005 at 7:19 PM / IP Logged

I have another question when I disarm it I get the door open icon but the door wasn’t tamper with at all do you think maybe I have a bad doorjamb switch? Until I get the issue fix is there a way I can bypass it? I just don’t want the alarm to go off.

Dave

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.