the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Problems programming Tach on a Ebay alarm


Post ReplyPost New Topic
< Prev Topic Next Topic >
newinstaller 
Copper - Posts: 160
Copper spacespace
Joined: July 11, 2004
Location: Canada
Posted: September 14, 2005 at 12:26 PM / IP Logged  

Hi,

Ok here is the deal. We installed an ebay special , it was a Radiostar/Carvox

Everything worked fine but there is no info in the manual to program a tach.

So when the car starts it grinds the engine.

Does nayone know how to program the tach on this unit?

http:///.com/ebaymotors/CARVOX-2-WAY-LCD-CAR-ALARM-WITH-REMOTE-ENGINE-STARTER_W0QQcmdZViewItemQQcategoryZ33721QQitemZ7999978975QQrdZ1QQsspagenameZWDVW

Hickmanae3 
Copper - Posts: 67
Copper spacespace
Joined: April 08, 2005
Posted: September 14, 2005 at 12:45 PM / IP Logged  
Try putting the tach wire with the ignition wire underneath the harness.
No security system can beat the tow truck :(
mo12v 
Platinum - Nominee - Posts: 2,748
Platinum - Nominee spaceThis member consistently provides reliable informationspace
Joined: September 30, 2003
Location: Afghanistan
Posted: September 14, 2005 at 12:53 PM / IP Logged  
Looks s ssccary to me
MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
gus1 
Gold - Posts: 1,013
Gold spacespace
Joined: October 15, 2003
Location: Canada
Posted: September 14, 2005 at 11:56 PM / IP Logged  
Yup.... reminds me why we only install what we sell......
Gus
Wherever I go, that is where I end up......
newinstaller 
Copper - Posts: 160
Copper spacespace
Joined: July 11, 2004
Location: Canada
Posted: September 15, 2005 at 7:33 AM / IP Logged  
I am thinking that is the best route for me
To install units I am fimiliar with
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: September 15, 2005 at 9:06 AM / IP Logged  

It can do the following :

Multiple signal detection for remote start - Tach, High-Voltage & Oil sensor.

Try the voltage sense instead if you can't program the tach.

Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
blazeronspokes 
Copper - Posts: 102
Copper spacespace
Joined: February 09, 2005
Location: United States
Posted: September 15, 2005 at 12:33 PM / IP Logged  
this alarm sounds like a cluster.
newinstaller 
Copper - Posts: 160
Copper spacespace
Joined: July 11, 2004
Location: Canada
Posted: September 16, 2005 at 8:35 AM / IP Logged  
Do you know how to do the Voltage Sensing?
The manual is really $%^#
Thanks
bazzgazm 
Copper - Posts: 113
Copper spacespace
Joined: June 06, 2004
Location: United States
Posted: September 16, 2005 at 9:19 AM / IP Logged  
WTH is oil sensing ?     heh. i've been doing remote starts for a few years now.. and i've never heard of a dei, code, or even an autopage with "oil sensing" i can just see quality ooozing from this unit
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: September 16, 2005 at 9:29 AM / IP Logged  

newinstaller wrote:
Do you know how to do the Voltage Sensing?
The manual is really $%^#
Thanks

You have mail

Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Page of 2

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer