2002 Chevy Silverado door locks

I am installing a Crimestopper CS-2016 system on my truck. The installation instructions say that one wire puts out a (-)lock and (+)unlock pulse. The other wire puts out a (-) unlock and (+) lock pulse on the lock/unlock wires. How do I hook these wire up to work the door locks on my 2002 Silverado pickup? Will I need any additional equipment to do this (relays,diodes)?? I really appreciate any help. Thanks PS - You can go to www.crimestopper.com and view the installation manual for this product (CS-2016).mrsparky637

CS suggest you use Diodes or Relays for Door Lock hook-up.

Some installers hook direct, but that is NOT a good practice.

Power Lock	L BLUE	AT B.C.M. BELOW THE STEERING COLUMN
Power Unlock	WHITE	IN BROWN CONNECTOR

Positive Pulse Door Locks

MO

Don't Learn from Others Mistakes

You Might Be the One That Knows.

I did ask before, but was for a different crimestopper product. I also, wanted to make sure I gave as much information as I could. What type of diodes will I need and how will I need to install them? As you can tell I am not a professional installer, but I do know my limitations. I just want the thing to work and not mess up my truck. Thanks for your helpmrsparky637

If I need to use relays will I be changing the polarity or what? I am confused by cs listing - and + on each wire. Thanks againmrsparky637

Some Units automatically switch Door Lock Voltage.Some Units have to be Programmed.Your Installation Manual should have that.I believe that the CS-2016 does NOT need to be programmed.U will need 2 Diodes for connectionsMO

Don't Learn from Others Mistakes

You Might Be the One That Knows.

OK, I appreciate the help!!!mrsparky637

the crimestopper alarm willgive you a neg and a pos trigger the chevy uses a pos trigger you dont need any relays all you would have to do is revers the wires on the alarm hook the lock form the alarm to the unlock on the truck hook the unlock to thelock wire on the truck thats it sounds wiered but its true