add trunk release button, 1992 renault

sneakycyber,the renault problem solved because like u said a spring is returning the mechanism back to its place after i open the trunk,so an actuator will be no problem to install i hope,but now there is the galant problem,it's in the previous page can u take a look and tell me what u think?(the question is about the galant not about the roll up module) thanks

Yes it usually is the dirvers side however. It can be the passengers side on some models. I am not sure on your vehicle wich one it is but here is the wiring diagram

DRIVER WINDOW UP	RED / blue	At main window switch	REV POL
DRIVER WINDOW DOWN	GREEN/ black	At main window switch	REV POL
PASSENGER WINDOW UP	RED / blue	At main window switch	REV POL
PASSENGER WINDOW DOWN	GREEN/ black	At main window switch	REV POL
LEFT REAR WINDOW UP	RED / blue	At main window switch	REV POL
LEFT REAR WINDOW DOWN	GREEN/ black	At main window switch	REV POL
RIGHT REAR WINDOW UP	RED / blue	At main window switch	REV POL
RIGHT REAR WINDOW DOWN	GREEN/ black	At main window switch	REV POL

These wires will test neg at rest and positive when switched.

thanks a lot u really helped me on this one.

Glad I could help