Remote start activation!

Home / the12volt's Install Bay / Car Security and Convenience / Remote start activation! (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

jshgrad1

Member - Posts: 5

Joined: September 26, 2005

Location: United States

Posted: September 28, 2005 at 9:02 PM / IP Logged

Can i tell my alarms 3rd cahnel - to the DEI WHITE/ Blue - Activation to start the vehicle? Kinda old at this! Thanks

fingaz22

Silver - Posts: 410

This member has made a donation to the12volt.com. Click here for more info.

Joined: March 11, 2005

Location: United States

Posted: September 28, 2005 at 9:27 PM / IP Logged

what polarity pluse comes out of your third channel? and what polarity does the dei need to see? a relay could help if they are diffrent.

JUST ONE MORE AMP!!!

hu,alpine cva 1005/dva 5205

sound processor,symmetry(first one).

sub amp,power 1000 the terminator.(1992).

subs,spl comp dual 1 ohms.

punch 150hd on a 10" ev.

alotofhighs

redpeppers

Silver - Posts: 483

Joined: May 24, 2005

Location: United States

Posted: September 28, 2005 at 11:43 PM / IP Logged

the WHITE/ blue is a negitive trigger and almost all alarms extra channels a negitive outputs....so use it will work.....unless the output off the 3rd channel is postive....which i doubt

Where theres is a wire there's a way.

kgerry

Platinum - Posts: 3,455

This member consistently provides reliable information

Joined: February 07, 2004

Location: Saskatchewan, Canada

Posted: September 29, 2005 at 10:12 AM / IP Logged

many DEI units now have a WHITE/ red + activation input as well.......

Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

jshgrad1

Member - Posts: 5

Joined: September 26, 2005

Location: United States

Posted: September 29, 2005 at 1:21 PM / IP Logged

The whte/blue worked fine, I just had to turn the senistivty down on the shock sensor and she starts and alarm works fine! That car definately starts funny, i cant beleive by just showing the Resistor it starts. Went like a charm, Thanks to all who helped

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Remote start activation!

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.