I cant get the remote start to work

Home / the12volt's Install Bay / Car Security and Convenience / I cant get the remote start to work (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

richsei

Member - Posts: 16

Joined: September 27, 2005

Location: United States

Posted: September 29, 2005 at 8:34 AM / IP Logged

I need help I'm putting in a alarm/ remote start in a 2002 f350 ford and I cant get the remote start to start the truck. Now if I take the wire going to my door trigger off and just put 12v on it for sec. then everything works fine. so I did the diode on the driver side do I have to do this on all four doors and if so where do I find the wires and what color. also by putting in the diodes will by alarm still work when someone opens the door????

This is a Black Widow BW-Z5

iskidoo

Silver - Posts: 1,043

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 08, 2002

Location: Maine, United States

Posted: September 29, 2005 at 12:04 PM / IP Logged

Do you have 2 seperate issues or are you saying the door trigger problem is causing your remote start problem?

Steve G

richsei

Member - Posts: 16

Joined: September 27, 2005

Location: United States

Posted: September 29, 2005 at 1:24 PM / IP Logged

yes the door trigger is causing the problem

iskidoo

Silver - Posts: 1,043

Joined: December 08, 2002

Location: Maine, United States

Posted: September 29, 2005 at 1:51 PM / IP Logged

I can't imagine why a door trigger would cause you remote starter not to function unless you're using the hood trigger input wire instead of the door tigger. The door triggers shouldn't do anything to stop the starter from functioning. This isn't a manual transmission remote start unit is it?

if that's the case is the vehicle manual or automatic? Is the unit set for manual operation?

Steve G

iskidoo

Silver - Posts: 1,043

Joined: December 08, 2002

Location: Maine, United States

Posted: September 29, 2005 at 1:55 PM / IP Logged

MANUAL TRANSMISSION MODE

On manual transmission vehicles, the remote

start feature will not operate unless the proper

vehicle exit sequence is performed. This

operating mode protects against in-gear

starting but is not completely without risk.

Installation and safe use of the remote start

feature on a manual transmission vehicle is at

the sole risk of the vehicle’s owner, and the

manufacturer assumes no liability for

installation in manual transmission vehicles.

Manual Transmission Safe Mode Exit Sequence:

With the engine running and the parking brake

set, press the unlock button. Turn ignition off

(engine will stay running) and open the doors,

then exit the vehicle. When all doors are

closed, press lock button to turn off the engine

and arm the system. The system will be able to

remote start as long as the alarm is not

disarmed prior to remote starting.

Steve G

sneakycyber

Silver - Posts: 413

Joined: September 13, 2005

Location: United States

Posted: September 29, 2005 at 1:56 PM / IP Logged

Sounds like iskidoo might be on to something make sure you dont have your door trigger and your hood switch wires mixed up.

richsei

Member - Posts: 16

Joined: September 27, 2005

Location: United States

Posted: September 29, 2005 at 2:29 PM / IP Logged

checked that they are fine, and yes it is a manual.

iskidoo

Silver - Posts: 1,043

Joined: December 08, 2002

Location: Maine, United States

Posted: September 29, 2005 at 2:44 PM / IP Logged

What color wire are you using from the alarm brain for your door trigger?

Blue/Red? <<<This is the one you need

Blue/Black?

What color are you hooking to in the truck?

BLACK/ lt. blue (+)

I cant get the remote start to work -- posted image.

You do understand how to use the Manual Transmission Safe Mode Exit Sequence right?

http://blackwidowsecurity.com/currentpdf/x-z%20series%20complete%20rev2.pdf

Steve G

richsei

Member - Posts: 16

Joined: September 27, 2005

Location: United States

Posted: September 29, 2005 at 3:27 PM / IP Logged

I have blue/red from the alarm hooked to the BLACK/ Lt blue in the DKP

richsei

Member - Posts: 16

Joined: September 27, 2005

Location: United States

Posted: September 29, 2005 at 4:01 PM / IP Logged

so I guess no one has put one of these Black Widows in a 2002 F350 SD before???

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.