91 BMW door locks

OK you have 2 options. 1/ remove the battery terminals then unplug the module. Open it up and locate pins 24-25 on the board. Solder 2 wires onto the board, drill a hole in the black box case and bring the 2 wires out of the box. This is the way that i would do it. 2/ Split the plug down that plugs into the control module. Strip 10-15mm from the ends of your CDL control wires (ones from the alarm unit). Tin the bared ends with your solder iron and insert these into the holes where the pins would be located inside the plug. Rebuild the plug then insert it into the control module. Not an ideal way of doing it but it works.

K thanx, I soldered in the ZV module and everything works great.  Thank you for your help