the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Audiobahn DUB1200's + JBL BP100.1 Amp


Post ReplyPost New Topic
< Prev Topic Next Topic >
jasonbrace1 
Member - Posts: 23
Member spacespace
Joined: October 01, 2005
Location: United States
Posted: October 04, 2005 at 4:27 PM / IP Logged  

Would a GTO1200.1 work? Or maybe the BPX500.1? Or do I need to get the BPX1100.1 for sure?

Also, I'm getting a Nissan SE-R for my graduation this year, and sill a 5 cu. ft. box fit in that??? I've got a 99 Explorer Sport now, so there no problem for the time being, but will the box have to be that big?

Blowntweeters 
Silver - Posts: 650
Silver spacespace
Joined: June 03, 2005
Location: Nevada, United States
Posted: October 04, 2005 at 5:01 PM / IP Logged  
the box only has to be big enough to get recommended air space. the GTO 1200.1 will work but you would have to run it at 1 ohm. and that is not going to give you good SQ. you could fit a box that big in  sentra SE-R but you would have to put it together in the trunk. .
1974 ford pinto 4 15" punch Z power punch bd 1001 pioneer DEH-6700
jasonbrace1 
Member - Posts: 23
Member spacespace
Joined: October 01, 2005
Location: United States
Posted: October 04, 2005 at 6:33 PM / IP Logged  

What about two REF611A (the infinity amps)

CEA Rated Yes

Power Output 456 watts RMS x 1 channel at 4 ohms and ¡Ü 1% THD + N 657 watts RMS x 1 channel at 2 ohms, 14.4V supply and ¡Ü 1% THD + N
Signal-to-Noise Ratio 70 dBA (reference 1 watt into 4 ohms)
Dynamic Power 761 watts at 2 ohms
Effective Damping Factor 6.336 at 4 ohms
Frequency Response (-3dB) 17Hz - 251Hz
Maximum Input Signal 6V
Maximum Sensitivity 250mV
Output Regulation .179 dB at 4 ohms

Would two of those work? Are the infinity amps worth anything? Or do they suck?

jasonbrace1 
Member - Posts: 23
Member spacespace
Joined: October 01, 2005
Location: United States
Posted: October 04, 2005 at 6:34 PM / IP Logged  
It's an Altima SE-R Audiobahn DUB1200's + JBL BP100.1 Amp - Page 3 -- posted image.
Blowntweeters 
Silver - Posts: 650
Silver spacespace
Joined: June 03, 2005
Location: Nevada, United States
Posted: October 04, 2005 at 7:11 PM / IP Logged  
infinity amps are junk
1974 ford pinto 4 15" punch Z power punch bd 1001 pioneer DEH-6700
jasonbrace1 
Member - Posts: 23
Member spacespace
Joined: October 01, 2005
Location: United States
Posted: October 04, 2005 at 8:18 PM / IP Logged  
aight, do you have any suggestions on what i should sell the GTi and BP1200.1 for? what would you pay for them both if you were buying? The subs comes with a sealed box.
jasonbrace1 
Member - Posts: 23
Member spacespace
Joined: October 01, 2005
Location: United States
Posted: October 04, 2005 at 9:51 PM / IP Logged  
I went to that Kenetik Audio site, and my uncle has some of those at his warehouse (the small one). How hard is it to do a second battery in the back of the car? or is that way out of my league?
Blowntweeters 
Silver - Posts: 650
Silver spacespace
Joined: June 03, 2005
Location: Nevada, United States
Posted: October 04, 2005 at 10:08 PM / IP Logged  
if  he has some of those in his warehouse the HC 600's. go for it all you need is an isolator. and for an amp what do you want ? if you want SPL and don't care about SQ. get a hi fonic's amp from www.ikesound.com for that amp and sub i would'nt pay much . but i know how cheep i can get audio gear online. that jbl sub is a 15" ? i would sell the amp for like $175 and the sub for like $100 or $125. BTW where are you located ?
1974 ford pinto 4 15" punch Z power punch bd 1001 pioneer DEH-6700
jasonbrace1 
Member - Posts: 23
Member spacespace
Joined: October 01, 2005
Location: United States
Posted: October 04, 2005 at 10:22 PM / IP Logged  
The sub is a 15" JBL WGTI 800W RMS, 5,000WPeak. It cost me $250 cuz my bro works for JBL! But it still retials, even on ebay for like $399 is what i last saw one at. What is an isolater, and how does it work??? I'm in Nashville, TN. I'm probably gonna end up gettin the BPX1100.1. How did you come up with the 570RMS to each? The Specs say like 350RMS X 2 @ 4ohms.
Alpineranger 
Member - Posts: 6
Member spacespace
Joined: February 03, 2004
Location: United States
Posted: October 04, 2005 at 11:11 PM / IP Logged  
The BP1200.1 is 1ohm stable it will run fine at 1ohm. The BPX1100.1 will do at least 1100 watts between 1 and 4 ohms.
Wire the subs at 1 ohm and the bp1200.1 will be fine. Wire them at 4 ohms and you'll want to go with the bpx1100.1
I have used both on a w12gti both are loud. the bpx has a higher dampning factor as well. It sounds cleaner than the bp.
2003 Ranger EXT Cab
Sony CDXC90, XDP210EQ
Alpine SPX177A
JBL p1020, BP600.1
Page of 5

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, April 19, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer