RX8 door lock relay?

Home / the12volt's Install Bay / Car Security and Convenience / RX8 door lock relay? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

irfan

Member - Posts: 22

Joined: September 24, 2005

Location: United States

Posted: October 10, 2005 at 7:43 AM / IP Logged

does anyone know how to wire a relay to make my aftermarket remote start work with the doorlocks?

i have a 2004 mazda RX8 and a compustar 2w900fm remote start. im pretty sure it needs a relay but not sure what type or how to wire it up

Back to Top

mo12v

Platinum - Nominee - Posts: 2,748

This member consistently provides reliable information

Joined: September 30, 2003

Location: Afghanistan

Posted: October 10, 2005 at 8:35 AM / IP Logged

irfan wrote:

does anyone know how to wire a relay to make my aftermarket remote start work with the doorlocks?

I hope you mean your "Door Locks work By your Remote Start Unit"??

Power Lock	LT GREEN (-)	DRIVER KICK PANEL *
Power Unlock	SINGLE WIRE SYSTEM	DRIVER KICK PANEL *

* LT GREEN Wire Must See Ground Through 1000 Ohm Resistor For LOCK and Chassis Ground For UNLOCK

Single Wire Resistor Door Locks

MO

Don't Learn from Others Mistakes

You Might Be the One That Knows.

Back to Top

irfan

Member - Posts: 22

Joined: September 24, 2005

Location: United States

Posted: October 10, 2005 at 10:28 AM / IP Logged

yes that is what i meant:) the door locking feature of the alarm ,,,

so should i just wire it up without a relay and jsut put a 1000ohm resistor on the 'lock' output of the alarm system.., and connect both lock and unlock wires from alarm into the LtGreen wire?

the outputs from the alarm are (-) 250ma

Back to Top

irfan

Member - Posts: 22

Joined: September 24, 2005

Location: United States

Posted: October 10, 2005 at 10:43 AM / IP Logged

radioshack has 1N4001 but not 1N4001/L diodes, are they interchangeable?

Back to Top

irfan

Member - Posts: 22

Joined: September 24, 2005

Location: United States

Posted: October 10, 2005 at 7:43 PM / IP Logged

i got it ,

UNLOCK relay

87 - ground

87a - empty

86- 12v

85 - unlock signal from alarm

30- to light green

LOCK

signal from alarm -->diode --> 1K ohm resistor --> light green wire (no relay)

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

RX8 door lock relay?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.