556T and 2WSS-AS

I have a 2004 model 2WSS-AS without the temp module. If I were to add a DEI 556T, where would I attach the (-)Trigger Output to the 2WSS-AS? Thank you Jae

BTW, here is the install manual for the 556T http://www.directechs.com/guides/manuals/ig/valet/N556T.pdf Thanks again. Jae

From what I can see there is a CN10 harness but the Compustar unit has a 3 pin connection and the DEI peice has 4. The (+) & (-) is basic, but not sure if the Compustar's input trigger is a (-) or (+) ? You will need to test this out by applying a (-) trigger first to the middle pin and see if this starts the vehicle. DO THIS AT YOUR OWN RISK, not responsible for anything that burns up or starts smoking, just telling you what I think is right. I have the temp sensor's for the Compustar for sale if you want ?Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA