ZX central locking

Home / the12volt's Install Bay / Car Security and Convenience / ZX central locking (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

widget

Member - Posts: 4

Joined: October 19, 2005

Location: United Kingdom

Posted: October 19, 2005 at 10:01 AM / IP Logged

I have fitted a new alarm to my ZX 14i

and it also as the central locking on the alarm and i want to use it .On the alarm loom there is 6 wires but am i right in thinking that only the trigger wires need to be fitted to the device under the centre hanbrake console , And if i fit it will i need to do something like disable the original central locking

widget

Member - Posts: 4

Joined: October 19, 2005

Location: United Kingdom

Posted: October 19, 2005 at 4:39 PM / IP Logged

AOLIN 838 central locking and auto start

widget

Member - Posts: 4

Joined: October 19, 2005

Location: United Kingdom

Posted: October 19, 2005 at 4:54 PM / IP Logged

It as 6 whiers coming out of the alarm for the locking ora / whi / yell/ and the same with a black stripe yellow and yellow black go to earth both oranges have a scissor mark so i prosume dont need them so that leaves the white wires signal on and signal off oh now i have wrote it down it makes sence . But just one thing do i put them to the drivers door motor or the unit in the console

widget

Member - Posts: 4

Joined: October 19, 2005

Location: United Kingdom

Posted: October 20, 2005 at 4:48 AM / IP Logged

Can some one please tell me which is the sensor wires on the control unit ora/blue and orange or green /blue . green white

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

ZX central locking

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.