2005 Hyundai factory doorlock disarm

Does anyone know what wire to hook into to disarm factory doorlock alarm when unlocking?

model?

Sorry. It is an Elantra

Disarms with factory remote only

OR

it should Disarm with ign, acc, and key sense Powered Up

MO

Don't Learn from Others Mistakes

You Might Be the One That Knows.

The factory alarm will still disarm with ignition and the first accessory wire powered up (the one that powers the climate controls). The wire that powers up the radio; that's up to you. I leave it unpowered so the radio stays off, but it won't hurt if you power it up. If you trigger the keysense wire, the factory remotes will not work with the engine running. Unfortunately, the best solution is this: Install the remote start, leaving the keysense wire alone. Carry the factory remote to control the locks and trunk.